CMU MEMS Laboratory Publication Abstract


in Applied Optics, pp. 6422-6426, vol. 42, no. 31, November 2003.
Endoscopic Optical Coherence Tomography With A Modified Microelectromechanical Systems Mirror For Detection of Bladder Cancers
T. Xie, H. Xie, G. Fedder and Y. Pan
Experimental results of a modified micromachined microelectromechanical systems (MEMS) mirror for substantial enhancement of the transverse laser scanning performance of endoscopic optical coherence tomography (EOCT) are presented. Image distortion due to buckling of MEMS mirror in our previous designs was analyzed and found to be attributed to excessive internal stress of the transverse bimorph meshes. The modified MEMS mirror completely eliminates bimorph stress and the resultant buckling effect, which increases the wobbling-free angular optical actuation to greater than 37°, exceeding the transverse laser scanning requirements for EOCT and confocal endoscopy. The new optical coherence tomography (OCT) endoscope allows for two-dimensional cross-sectional imaging that covers an area of 4.2 mm x 2.8 mm (limited by scope size) and at roughly 5 frames/s instead of the previous area size of 2.9 mm x 2.8 mm and is highly suitable for noninvasive and high-resolution imaging diagnosis of epithelial lesions in vivo. EOCT images of normal rat bladders and rat bladder cancers are compared with the same cross sections acquired with conventional bench-top OCT. The results clearly demonstrate the potential of EOCT for in vivo imaging diagnosis and precise guidance for excisional biopsy of early bladder cancers.
© 2003 Optical Society of America. All rights reserved.
Full paper not available from outside CMU

This page was generated in 0.018906 seconds at 07:40:46 am EDT on 24 Mar 2018.

overview | projects | people | publications | intranet | resources         © 1998-2009  Carnegie Mellon