CMU MEMS Laboratory Publication List

 

 
1. G. Wong, G. Tse, Q. Jing, T. Mukherjee and G. Fedder, Accuracy and composability in NODAS, in Proceedings of the 2003 IEEE/ACM Int. Workshop on Behavioral Modeling and Simulation (BMAS '03), pp. 82 - 87, October 7-8, 2003, San Jose, California.
[Abstract] | Full paper (PDF)
2. Q. Jing, Modeling and Simulation for Design of Suspended MEMS, Ph.D. Thesis, May 2003, Carnegie Mellon University, Pittsburgh, PA.
[Abstract] | Full paper (PDF)
3. Q. Jing, T. Mukherjee and G. Fedder, Schematic-Based Lumped Parameterized Behavioral Modeling for Suspended MEMS, in Technical Digest of the ACM/IEEE International ConferĀ­ence on Computer Aided Design (ICCAD '02), pp. 367-373, November 10-14, 2002, San Jose, California.
[Abstract] | Full paper (PDF)
4. Q. Jing, T. Mukherjee and G. Fedder, Large-Deflection Beam Model for Schematic-Based Behavioral Simulation in NODAS, in Technical Proceedings of the Fifth International Conference on Modeling and Simulation of Microsystems (MSM '02), pp. 136-139, April 22-25, 2002, San Juan, Puerto Rico.
[Abstract] | Full paper not available from outside CMU
5. Q. Jing, T. Mukherjee and G. Fedder, Schematic-based design of integrated MEMS, in Symposium on Computational Methods for Adaptive Structures and MEMS, 6th US National Congress on Computational Mechanics (USNCCM '01), pp. 581, August 1-4, 2001, Dearborn, Michigan.
[Abstract] | Full paper not available from outside CMU
6. S. V. Iyer, Q. Jing, G. Fedder and T. Mukherjee, Convergence and Speed Issues in Analog HDL Model Formulation for MEMS, in Technical Proceedings of the Fourth International Conference on Modeling and Simulation of Microsystems (MSM '01), pp. 590-593, March 19-21, 2001, Hilton Head, SC, USA.
[Abstract] | Full paper not available from outside CMU
7. H. Xie, L. Erdmann, Q. Jing and G. Fedder, Simulation and Characterization of a CMOS Z-axis Microactuator with Electrostatic Comb Drives, in Technical Proceedings of the Third International Conference on Modeling and Simulation of Microsystems (MSM '00), pp. 181-184, March 27-29, 2000, San Diego, CA, USA.
[Abstract] | Full paper not available from outside CMU
8. Q. Jing, H. Luo, T. Mukherjee, R. Carley and G. Fedder, CMOS Micromechanical Bandpass Filter Design Using a Hierarchical MEMS Circuit Library, in Proceedings of the 13th IEEE International Conference on Micro Electro Mechanical Systems (MEMS '00), pp. 187-192, January 23-27, 2000, Miyazaki, Japan.
[Abstract] | Full paper (PDF)
9. Q. Jing, T. Mukherjee and G. Fedder, A Design Methodology for Micromechanical Bandpass Filters, in Proceedings of 1999 IEEE/ACM/VIUF Intl. Workshop on Behavioral Modeling and Simulation (BMAS '99), October 4-6, 1999, Orlando, FL, USA.
[Abstract] | Full paper (PDF)
10. G. Fedder and Q. Jing, A Hierarchical Circuit-Level Design Methodology Microelectromechanical Systems, in IEEE Transactions on Circuits & Systems II (TCAS), Volume 46, Issue 10, pp. 1309-1315, October 1999.
[Abstract] | Full paper (PDF)
11. Q. Jing and G. Fedder, NODAS 1.3 - Nodal Design Of Actuators And Sensors, in Proceedings of 1998 IEEE/VIUF International Workshop on Behavioral Modeling and Simulation (BMAS '98), October 26-28, 1998, Orlando, FL, USA.
[Abstract] | Full paper (PDF)
Your request returns 11 results.


This page was generated in 0.133227 seconds at 03:32:48 pm UTC on 28 Mar 2024.

overview | projects | people | publications | intranet | resources         © 1998-2009  Carnegie Mellon