MUMPS Extraction Module Accelerometer Synthesis 
     
   

Please enter the desired accelerometer performance specifications in the form below. The optimized parameters for the accelerometer and an iconified layout view will be generated, and the CIF file of the synthesized accelerometer (for the HP 0.5u (MOSIS SCMOS) process) will be sent to the recipient's e-mail address you enter below. 
In this initial web version we are limiting users to specifying sensitivity, range, noise and design objective. The design objectives are minimize noise, area, OR maximize sensitivity, range. 
With the current size limitations on the design of CMOS accelerometer, the limits on design objectives are as shown on their respective buttons. 


Optimization Design Objective: Noise Area 
Area + Noise 

Range Sensitivity
Min Desired Sensitivity(mV/G): [1 - 50]
Min Desired Range(G): [1 - 100]
Max Desired Noise(mG/rtHz)[ 0.03 - ]: 



Recepient's E-mail Address:

Your Name:
Your E-mail Address*
*If this address is the same as above, leave it blank.